The functions described in this section are used to control and monitor a PostgreSQL installation.
Table 9.83 shows the functions available to query and alter run-time configuration parameters.
Function
Description
Example(s)
current_setting ( setting_name text [, missing_ok boolean ] ) → text
Returns the current value of the setting setting_name. If there is no such setting, current_setting throws an error unless missing_ok is supplied and is true. This function corresponds to the SQL command SHOW.
current_setting('datestyle') → ISO, MDY
set_config ( setting_name text, new_value text, is_local boolean ) → text
Sets the parameter setting_name to new_value, and returns that value. If is_local is true, the new value will only apply for the current transaction. If you want the new value to apply for the current session, use false instead. This function corresponds to the SQL command SET.
set_config('log_statement_stats', 'off', false) → off
The functions shown in Table 9.84 send control signals to other server processes. Use of these functions is restricted to superusers by default but access may be granted to others using GRANT, with noted exceptions.
Each of these functions returns true if successful and false otherwise.
Function
Description
pg_cancel_backend ( pid integer ) → boolean
Cancels the current query of the session whose backend process has the specified process ID. This is also allowed if the calling role is a member of the role whose backend is being canceled or the calling role has been granted pg_signal_backend, however only superusers can cancel superuser backends.
pg_reload_conf () → boolean
Causes all processes of the PostgreSQL server to reload their configuration files. (This is initiated by sending a SIGHUP signal to the postmaster process, which in turn sends SIGHUP to each of its children.)
pg_rotate_logfile () → boolean
Signals the log-file manager to switch to a new output file immediately. This works only when the built-in log collector is running, since otherwise there is no log-file manager subprocess.
pg_terminate_backend ( pid integer ) → boolean
Terminates the session whose backend process has the specified process ID. This is also allowed if the calling role is a member of the role whose backend is being terminated or the calling role has been granted pg_signal_backend, however only superusers can terminate superuser backends.
pg_cancel_backend and pg_terminate_backend send signals (SIGINT or SIGTERM respectively) to backend processes identified by process ID. The process ID of an active backend can be found from the pid column of the pg_stat_activity view, or by listing the postgres processes on the server (using ps on Unix or the Task Manager on Windows). The role of an active backend can be found from the usename column of the pg_stat_activity view.
The functions shown in Table 9.85 assist in making on-line backups. These functions cannot be executed during recovery (except non-exclusive pg_start_backup, non-exclusive pg_stop_backup, pg_is_in_backup, pg_backup_start_time and pg_wal_lsn_diff).
For details about proper usage of these functions, see Section 25.3.
Function
Description
pg_create_restore_point ( name text ) → pg_lsn
This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
pg_current_wal_flush_lsn () → pg_lsn
Returns the current write-ahead log flush location (see notes below).
pg_current_wal_insert_lsn () → pg_lsn
Returns the current write-ahead log insert location (see notes below).
pg_current_wal_lsn () → pg_lsn
Returns the current write-ahead log write location (see notes below).
pg_start_backup ( label text [, fast boolean [, exclusive boolean ]] ) → pg_lsn
Prepares the server to begin an on-line backup. The only required parameter is an arbitrary user-defined label for the backup. (Typically this would be the name under which the backup dump file will be stored.) If the optional second parameter is given as true, it specifies executing pg_start_backup as quickly as possible. This forces an immediate checkpoint which will cause a spike in I/O operations, slowing any concurrently executing queries. The optional third parameter specifies whether to perform an exclusive or non-exclusive backup (default is exclusive).
When used in exclusive mode, this function writes a backup label file (backup_label) and, if there are any links in the pg_tblspc/ directory, a tablespace map file (tablespace_map) into the database cluster's data directory, then performs a checkpoint, and then returns the backup's starting write-ahead log location. (The user can ignore this result value, but it is provided in case it is useful.) When used in non-exclusive mode, the contents of these files are instead returned by the pg_stop_backup function, and should be copied to the backup area by the user.
This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
pg_stop_backup ( exclusive boolean [, wait_for_archive boolean ] ) → setof record ( lsn pg_lsn, labelfile text, spcmapfile text )
Finishes performing an exclusive or non-exclusive on-line backup. The exclusive parameter must match the previous pg_start_backup call. In an exclusive backup, pg_stop_backup removes the backup label file and, if it exists, the tablespace map file created by pg_start_backup. In a non-exclusive backup, the desired contents of these files are returned as part of the result of the function, and should be written to files in the backup area (not in the data directory).
There is an optional second parameter of type boolean. If false, the function will return immediately after the backup is completed, without waiting for WAL to be archived. This behavior is only useful with backup software that independently monitors WAL archiving. Otherwise, WAL required to make the backup consistent might be missing and make the backup useless. By default or when this parameter is true, pg_stop_backup will wait for WAL to be archived when archiving is enabled. (On a standby, this means that it will wait only when archive_mode = always. If write activity on the primary is low, it may be useful to run pg_switch_wal on the primary in order to trigger an immediate segment switch.)
When executed on a primary, this function also creates a backup history file in the write-ahead log archive area. The history file includes the label given to pg_start_backup, the starting and ending write-ahead log locations for the backup, and the starting and ending times of the backup. After recording the ending location, the current write-ahead log insertion point is automatically advanced to the next write-ahead log file, so that the ending write-ahead log file can be archived immediately to complete the backup.
The result of the function is a single record. The lsn column holds the backup's ending write-ahead log location (which again can be ignored). The second and third columns are NULL when ending an exclusive backup; after a non-exclusive backup they hold the desired contents of the label and tablespace map files.
This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
pg_stop_backup () → pg_lsn
Finishes performing an exclusive on-line backup. This simplified version is equivalent to pg_stop_backup(true, true), except that it only returns the pg_lsn result.
This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
pg_is_in_backup () → boolean
Returns true if an on-line exclusive backup is in progress.
pg_backup_start_time () → timestamp with time zone
Returns the start time of the current on-line exclusive backup if one is in progress, otherwise NULL.
pg_switch_wal () → pg_lsn
Forces the server to switch to a new write-ahead log file, which allows the current file to be archived (assuming you are using continuous archiving). The result is the ending write-ahead log location plus 1 within the just-completed write-ahead log file. If there has been no write-ahead log activity since the last write-ahead log switch, pg_switch_wal does nothing and returns the start location of the write-ahead log file currently in use.
This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
pg_walfile_name ( lsn pg_lsn ) → text
Converts a write-ahead log location to the name of the WAL file holding that location.
pg_walfile_name_offset ( lsn pg_lsn ) → record ( file_name text, file_offset integer )
Converts a write-ahead log location to a WAL file name and byte offset within that file.
pg_wal_lsn_diff ( lsn pg_lsn, lsn pg_lsn ) → numeric
pg_current_wal_lsn displays the current write-ahead log write location in the same format used by the above functions. Similarly, pg_current_wal_insert_lsn displays the current write-ahead log insertion location and pg_current_wal_flush_lsn displays the current write-ahead log flush location. The insertion location is the “logical” end of the write-ahead log at any instant, while the write location is the end of what has actually been written out from the server's internal buffers, and the flush location is the last location known to be written to durable storage. The write location is the end of what can be examined from outside the server, and is usually what you want if you are interested in archiving partially-complete write-ahead log files. The insertion and flush locations are made available primarily for server debugging purposes. These are all read-only operations and do not require superuser permissions.
You can use pg_walfile_name_offset to extract the corresponding write-ahead log file name and byte offset from a pg_lsn value. For example:
Similarly, pg_walfile_name extracts just the write-ahead log file name. When the given write-ahead log location is exactly at a write-ahead log file boundary, both these functions return the name of the preceding write-ahead log file. This is usually the desired behavior for managing write-ahead log archiving behavior, since the preceding file is the last one that currently needs to be archived.
The functions shown in Table 9.86 provide information about the current status of a standby server. These functions may be executed both during recovery and in normal running.
Function
Description
pg_is_in_recovery () → boolean
Returns true if recovery is still in progress.
pg_last_wal_receive_lsn () → pg_lsn
Returns the last write-ahead log location that has been received and synced to disk by streaming replication. While streaming replication is in progress this will increase monotonically. If recovery has completed then this will remain static at the location of the last WAL record received and synced to disk during recovery. If streaming replication is disabled, or if it has not yet started, the function returns NULL.
pg_last_wal_replay_lsn () → pg_lsn
Returns the last write-ahead log location that has been replayed during recovery. If recovery is still in progress this will increase monotonically. If recovery has completed then this will remain static at the location of the last WAL record applied during recovery. When the server has been started normally without recovery, the function returns NULL.
pg_last_xact_replay_timestamp () → timestamp with time zone
Returns the time stamp of the last transaction replayed during recovery. This is the time at which the commit or abort WAL record for that transaction was generated on the primary. If no transactions have been replayed during recovery, the function returns NULL. Otherwise, if recovery is still in progress this will increase monotonically. If recovery has completed then this will remain static at the time of the last transaction applied during recovery. When the server has been started normally without recovery, the function returns NULL.
The functions shown in Table 9.87 control the progress of recovery. These functions may be executed only during recovery.
Function
Description
pg_is_wal_replay_paused () → boolean
Returns true if recovery is paused.
pg_promote ( wait boolean DEFAULT true, wait_seconds integer DEFAULT 60 ) → boolean
Promotes a standby server to primary status. With wait set to true (the default), the function waits until promotion is completed or wait_seconds seconds have passed, and returns true if promotion is successful and false otherwise. If wait is set to false, the function returns true immediately after sending a SIGUSR1 signal to the postmaster to trigger promotion.
This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
pg_wal_replay_pause () → void
Pauses recovery. While recovery is paused, no further database changes are applied. If hot standby is active, all new queries will see the same consistent snapshot of the database, and no further query conflicts will be generated until recovery is resumed.
This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
pg_wal_replay_resume () → void
Restarts recovery if it was paused.
This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
pg_wal_replay_pause and pg_wal_replay_resume cannot be executed while a promotion is ongoing. If a promotion is triggered while recovery is paused, the paused state ends and promotion continues.
If streaming replication is disabled, the paused state may continue indefinitely without a problem. If streaming replication is in progress then WAL records will continue to be received, which will eventually fill available disk space, depending upon the duration of the pause, the rate of WAL generation and available disk space.
PostgreSQL allows database sessions to synchronize their snapshots. A snapshot determines which data is visible to the transaction that is using the snapshot. Synchronized snapshots are necessary when two or more sessions need to see identical content in the database. If two sessions just start their transactions independently, there is always a possibility that some third transaction commits between the executions of the two START TRANSACTION commands, so that one session sees the effects of that transaction and the other does not.
To solve this problem, PostgreSQL allows a transaction to export the snapshot it is using. As long as the exporting transaction remains open, other transactions can import its snapshot, and thereby be guaranteed that they see exactly the same view of the database that the first transaction sees. But note that any database changes made by any one of these transactions remain invisible to the other transactions, as is usual for changes made by uncommitted transactions. So the transactions are synchronized with respect to pre-existing data, but act normally for changes they make themselves.
Snapshots are exported with the pg_export_snapshot function, shown in Table 9.88, and imported with the SET TRANSACTION command.
Function
Description
pg_export_snapshot () → text
Saves the transaction's current snapshot and returns a text string identifying the snapshot. This string must be passed (outside the database) to clients that want to import the snapshot. The snapshot is available for import only until the end of the transaction that exported it.
The functions shown in Table 9.89 are for controlling and interacting with replication features. See Section 26.2.5, Section 26.2.6, and Chapter 49 for information about the underlying features. Use of functions for replication origin is restricted to superusers. Use of functions for replication slots is restricted to superusers and users having REPLICATION privilege.
Many of these functions have equivalent commands in the replication protocol; see Section 52.4.
The functions described in Section 9.27.3, Section 9.27.4, and Section 9.27.5 are also relevant for replication.
Function
Description
pg_create_physical_replication_slot ( slot_name name [, immediately_reserve boolean, temporary boolean ] ) → record ( slot_name name, lsn pg_lsn )
pg_drop_replication_slot ( slot_name name ) → void
Drops the physical or logical replication slot named slot_name. Same as replication protocol command DROP_REPLICATION_SLOT. For logical slots, this must be called while connected to the same database the slot was created on.
pg_create_logical_replication_slot ( slot_name name, plugin name [, temporary boolean ] ) → record ( slot_name name, lsn pg_lsn )
Creates a new logical (decoding) replication slot named slot_name using the output plugin plugin. The optional third parameter, temporary, when set to true, specifies that the slot should not be permanently stored to disk and is only meant for use by the current session. Temporary slots are also released upon any error. A call to this function has the same effect as the replication protocol command CREATE_REPLICATION_SLOT ... LOGICAL.
pg_copy_physical_replication_slot ( src_slot_name name, dst_slot_name name [, temporary boolean ] ) → record ( slot_name name, lsn pg_lsn )
Copies an existing physical replication slot named src_slot_name to a physical replication slot named dst_slot_name. The copied physical slot starts to reserve WAL from the same LSN as the source slot. temporary is optional. If temporary is omitted, the same value as the source slot is used.
pg_copy_logical_replication_slot ( src_slot_name name, dst_slot_name name [, temporary boolean [, plugin name ]] ) → record ( slot_name name, lsn pg_lsn )
Copies an existing logical replication slot named src_slot_name to a logical replication slot named dst_slot_name, optionally changing the output plugin and persistence. The copied logical slot starts from the same LSN as the source logical slot. Both temporary and plugin are optional; if they are omitted, the values of the source slot are used.
pg_logical_slot_get_changes ( slot_name name, upto_lsn pg_lsn, upto_nchanges integer, VARIADIC options text[] ) → setof record ( lsn pg_lsn, xid xid, data text )
Returns changes in the slot slot_name, starting from the point from which changes have been consumed last. If upto_lsn and upto_nchanges are NULL, logical decoding will continue until end of WAL. If upto_lsn is non-NULL, decoding will include only those transactions which commit prior to the specified LSN. If upto_nchanges is non-NULL, decoding will stop when the number of rows produced by decoding exceeds the specified value. Note, however, that the actual number of rows returned may be larger, since this limit is only checked after adding the rows produced when decoding each new transaction commit.
pg_logical_slot_peek_changes ( slot_name name, upto_lsn pg_lsn, upto_nchanges integer, VARIADIC options text[] ) → setof record ( lsn pg_lsn, xid xid, data text )
Behaves just like the pg_logical_slot_get_changes() function, except that changes are not consumed; that is, they will be returned again on future calls.
pg_logical_slot_get_binary_changes ( slot_name name, upto_lsn pg_lsn, upto_nchanges integer, VARIADIC options text[] ) → setof record ( lsn pg_lsn, xid xid, data bytea )
Behaves just like the pg_logical_slot_get_changes() function, except that changes are returned as bytea.
pg_logical_slot_peek_binary_changes ( slot_name name, upto_lsn pg_lsn, upto_nchanges integer, VARIADIC options text[] ) → setof record ( lsn pg_lsn, xid xid, data bytea )
Behaves just like the pg_logical_slot_peek_changes() function, except that changes are returned as bytea.
pg_replication_slot_advance ( slot_name name, upto_lsn pg_lsn ) → record ( slot_name name, end_lsn pg_lsn )
Advances the current confirmed position of a replication slot named slot_name. The slot will not be moved backwards, and it will not be moved beyond the current insert location. Returns the name of the slot and the actual position that it was advanced to. The updated slot position information is written out at the next checkpoint if any advancing is done. So in the event of a crash, the slot may return to an earlier position.
pg_replication_origin_create ( node_name text ) → oid
Creates a replication origin with the given external name, and returns the internal ID assigned to it.
pg_replication_origin_drop ( node_name text ) → void
Deletes a previously-created replication origin, including any associated replay progress.
pg_replication_origin_oid ( node_name text ) → oid
Looks up a replication origin by name and returns the internal ID. If no such replication origin is found an error is thrown.
pg_replication_origin_session_setup ( node_name text ) → void
Marks the current session as replaying from the given origin, allowing replay progress to be tracked. Can only be used if no origin is currently selected. Use pg_replication_origin_session_reset to undo.
pg_replication_origin_session_reset () → void
Cancels the effects of pg_replication_origin_session_setup().
pg_replication_origin_session_is_setup () → boolean
Returns true if a replication origin has been selected in the current session.
pg_replication_origin_session_progress ( flush boolean ) → pg_lsn
Returns the replay location for the replication origin selected in the current session. The parameter flush determines whether the corresponding local transaction will be guaranteed to have been flushed to disk or not.
pg_replication_origin_xact_setup ( origin_lsn pg_lsn, origin_timestamp timestamp with time zone ) → void
Marks the current transaction as replaying a transaction that has committed at the given LSN and timestamp. Can only be called when a replication origin has been selected using pg_replication_origin_session_setup.
pg_replication_origin_xact_reset () → void
Cancels the effects of pg_replication_origin_xact_setup().
pg_replication_origin_advance ( node_name text, lsn pg_lsn ) → void
Sets replication progress for the given node to the given location. This is primarily useful for setting up the initial location, or setting a new location after configuration changes and similar. Be aware that careless use of this function can lead to inconsistently replicated data.
pg_replication_origin_progress ( node_name text, flush boolean ) → pg_lsn
Returns the replay location for the given replication origin. The parameter flush determines whether the corresponding local transaction will be guaranteed to have been flushed to disk or not.
pg_logical_emit_message ( transactional boolean, prefix text, content text ) → pg_lsn
pg_logical_emit_message ( transactional boolean, prefix text, content bytea ) → pg_lsn
Emits a logical decoding message. This can be used to pass generic messages to logical decoding plugins through WAL. The transactional parameter specifies if the message should be part of the current transaction, or if it should be written immediately and decoded as soon as the logical decoder reads the record. The prefix parameter is a textual prefix that can be used by logical decoding plugins to easily recognize messages that are interesting for them. The content parameter is the content of the message, given either in text or binary form.
The functions shown in Table 9.90 calculate the disk space usage of database objects, or assist in presentation of usage results. All these functions return sizes measured in bytes. If an OID that does not represent an existing object is passed to one of these functions, NULL is returned.
Function
Description
pg_column_size ( "any" ) → integer
Shows the number of bytes used to store any individual data value. If applied directly to a table column value, this reflects any compression that was done.
pg_database_size ( name ) → bigint
pg_database_size ( oid ) → bigint
Computes the total disk space used by the database with the specified name or OID. To use this function, you must have CONNECT privilege on the specified database (which is granted by default) or be a member of the pg_read_all_stats role.
pg_indexes_size ( regclass ) → bigint
Computes the total disk space used by indexes attached to the specified table.
pg_relation_size ( relation regclass [, fork text ] ) → bigint
Computes the disk space used by one “fork” of the specified relation. (Note that for most purposes it is more convenient to use the higher-level functions pg_total_relation_size or pg_table_size, which sum the sizes of all forks.) With one argument, this returns the size of the main data fork of the relation. The second argument can be provided to specify which fork to examine:
main returns the size of the main data fork of the relation.
init returns the size of the initialization fork, if any, associated with the relation.
pg_size_bytes ( text ) → bigint
Converts a size in human-readable format (as returned by pg_size_pretty) into bytes.
pg_size_pretty ( bigint ) → text
pg_size_pretty ( numeric ) → text
Converts a size in bytes into a more easily human-readable format with size units (bytes, kB, MB, GB or TB as appropriate). Note that the units are powers of 2 rather than powers of 10, so 1kB is 1024 bytes, 1MB is 10242 = 1048576 bytes, and so on.
pg_table_size ( regclass ) → bigint
Computes the disk space used by the specified table, excluding indexes (but including its TOAST table if any, free space map, and visibility map).
pg_tablespace_size ( name ) → bigint
pg_tablespace_size ( oid ) → bigint
Computes the total disk space used in the tablespace with the specified name or OID. To use this function, you must have CREATE privilege on the specified tablespace or be a member of the pg_read_all_stats role, unless it is the default tablespace for the current database.
pg_total_relation_size ( regclass ) → bigint
Computes the total disk space used by the specified table, including all indexes and TOAST data. The result is equivalent to pg_table_size + pg_indexes_size.
The functions above that operate on tables or indexes accept a regclass argument, which is simply the OID of the table or index in the pg_class system catalog. You do not have to look up the OID by hand, however, since the regclass data type's input converter will do the work for you. Just write the table name enclosed in single quotes so that it looks like a literal constant. For compatibility with the handling of ordinary SQL names, the string will be converted to lower case unless it contains double quotes around the table name.
The functions shown in Table 9.91 assist in identifying the specific disk files associated with database objects.
Function
Description
pg_relation_filenode ( relation regclass ) → oid
pg_relation_filepath ( relation regclass ) → text
Returns the entire file path name (relative to the database cluster's data directory, PGDATA) of the relation.
pg_filenode_relation ( tablespace oid, filenode oid ) → regclass
Returns a relation's OID given the tablespace OID and filenode it is stored under. This is essentially the inverse mapping of pg_relation_filepath. For a relation in the database's default tablespace, the tablespace can be specified as zero. Returns NULL if no relation in the current database is associated with the given values.
Table 9.92 lists functions used to manage collations.
Function
Description
pg_collation_actual_version ( oid ) → text
pg_import_system_collations ( schema regnamespace ) → integer
Table 9.93 lists functions that provide information about the structure of partitioned tables.
Function
Description
pg_partition_tree ( regclass ) → setof record ( relid regclass, parentrelid regclass, isleaf boolean, level integer )
Lists the tables or indexes in the partition tree of the given partitioned table or partitioned index, with one row for each partition. Information provided includes the OID of the partition, the OID of its immediate parent, a boolean value telling if the partition is a leaf, and an integer telling its level in the hierarchy. The level value is 0 for the input table or index, 1 for its immediate child partitions, 2 for their partitions, and so on. Returns no rows if the relation does not exist or is not a partition or partitioned table.
pg_partition_ancestors ( regclass ) → setof regclass
Lists the ancestor relations of the given partition, including the relation itself. Returns no rows if the relation does not exist or is not a partition or partitioned table.
pg_partition_root ( regclass ) → regclass
Returns the top-most parent of the partition tree to which the given relation belongs. Returns NULL if the relation does not exist or is not a partition or partitioned table.
For example, to check the total size of the data contained in a partitioned table measurement, one could use the following query:
Table 9.94 shows the functions available for index maintenance tasks. (Note that these maintenance tasks are normally done automatically by autovacuum; use of these functions is only required in special cases.) These functions cannot be executed during recovery. Use of these functions is restricted to superusers and the owner of the given index.
Function
Description
brin_summarize_new_values ( index regclass ) → integer
Scans the specified BRIN index to find page ranges in the base table that are not currently summarized by the index; for any such range it creates a new summary index tuple by scanning those table pages. Returns the number of new page range summaries that were inserted into the index.
brin_summarize_range ( index regclass, blockNumber bigint ) → integer
Summarizes the page range covering the given block, if not already summarized. This is like brin_summarize_new_values except that it only processes the page range that covers the given table block number.
brin_desummarize_range ( index regclass, blockNumber bigint ) → void
Removes the BRIN index tuple that summarizes the page range covering the given table block, if there is one.
gin_clean_pending_list ( index regclass ) → bigint
The functions shown in Table 9.95 provide native access to files on the machine hosting the server. Only files within the database cluster directory and the log_directory can be accessed, unless the user is a superuser or is granted the role pg_read_server_files. Use a relative path for files in the cluster directory, and a path matching the log_directory configuration setting for log files.
Note that granting users the EXECUTE privilege on pg_read_file(), or related functions, allows them the ability to read any file on the server that the database server process can read; these functions bypass all in-database privilege checks. This means that, for example, a user with such access is able to read the contents of the pg_authid table where authentication information is stored, as well as read any table data in the database. Therefore, granting access to these functions should be carefully considered.
Some of these functions take an optional missing_ok parameter, which specifies the behavior when the file or directory does not exist. If true, the function returns NULL or an empty result set, as appropriate. If false, an error is raised. The default is false.
Function
Description
pg_ls_dir ( dirname text [, missing_ok boolean, include_dot_dirs boolean ] ) → setof text
Returns the names of all files (and directories and other special files) in the specified directory. The include_dot_dirs parameter indicates whether “.” and “..” are to be included in the result set; the default is to exclude them. Including them can be useful when missing_ok is true, to distinguish an empty directory from a non-existent directory.
This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
pg_ls_logdir () → setof record ( name text, size bigint, modification timestamp with time zone )
Returns the name, size, and last modification time (mtime) of each ordinary file in the server's log directory. Filenames beginning with a dot, directories, and other special files are excluded.
This function is restricted to superusers and members of the pg_monitor role by default, but other users can be granted EXECUTE to run the function.
pg_ls_waldir () → setof record ( name text, size bigint, modification timestamp with time zone )
Returns the name, size, and last modification time (mtime) of each ordinary file in the server's write-ahead log (WAL) directory. Filenames beginning with a dot, directories, and other special files are excluded.
This function is restricted to superusers and members of the pg_monitor role by default, but other users can be granted EXECUTE to run the function.
pg_ls_archive_statusdir () → setof record ( name text, size bigint, modification timestamp with time zone )
Returns the name, size, and last modification time (mtime) of each ordinary file in the server's WAL archive status directory (pg_wal/archive_status). Filenames beginning with a dot, directories, and other special files are excluded.
This function is restricted to superusers and members of the pg_monitor role by default, but other users can be granted EXECUTE to run the function.
pg_ls_tmpdir ( [ tablespace oid ] ) → setof record ( name text, size bigint, modification timestamp with time zone )
Returns the name, size, and last modification time (mtime) of each ordinary file in the temporary file directory for the specified tablespace. If tablespace is not provided, the pg_default tablespace is examined. Filenames beginning with a dot, directories, and other special files are excluded.
This function is restricted to superusers and members of the pg_monitor role by default, but other users can be granted EXECUTE to run the function.
pg_read_file ( filename text [, offset bigint, length bigint [, missing_ok boolean ]] ) → text
Returns all or part of a text file, starting at the given byte offset, returning at most length bytes (less if the end of file is reached first). If offset is negative, it is relative to the end of the file. If offset and length are omitted, the entire file is returned. The bytes read from the file are interpreted as a string in the database's encoding; an error is thrown if they are not valid in that encoding.
This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
pg_read_binary_file ( filename text [, offset bigint, length bigint [, missing_ok boolean ]] ) → bytea
Returns all or part of a file. This function is identical to pg_read_file except that it can read arbitrary binary data, returning the result as bytea not text; accordingly, no encoding checks are performed.
This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
In combination with the convert_from function, this function can be used to read a text file in a specified encoding and convert to the database's encoding:
pg_stat_file ( filename text [, missing_ok boolean ] ) → record ( size bigint, access timestamp with time zone, modification timestamp with time zone, change timestamp with time zone, creation timestamp with time zone, isdir boolean )
Returns a record containing the file's size, last access time stamp, last modification time stamp, last file status change time stamp (Unix platforms only), file creation time stamp (Windows only), and a flag indicating if it is a directory.
This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
The functions shown in Table 9.96 manage advisory locks. For details about proper use of these functions, see Section 13.3.5.
All these functions are intended to be used to lock application-defined resources, which can be identified either by a single 64-bit key value or two 32-bit key values (note that these two key spaces do not overlap). If another session already holds a conflicting lock on the same resource identifier, the functions will either wait until the resource becomes available, or return a false result, as appropriate for the function. Locks can be either shared or exclusive: a shared lock does not conflict with other shared locks on the same resource, only with exclusive locks. Locks can be taken at session level (so that they are held until released or the session ends) or at transaction level (so that they are held until the current transaction ends; there is no provision for manual release). Multiple session-level lock requests stack, so that if the same resource identifier is locked three times there must then be three unlock requests to release the resource in advance of session end.
Function
Description
pg_advisory_lock ( key bigint ) → void
pg_advisory_lock ( key1 integer, key2 integer ) → void
Obtains an exclusive session-level advisory lock, waiting if necessary.
pg_advisory_lock_shared ( key bigint ) → void
pg_advisory_lock_shared ( key1 integer, key2 integer ) → void
Obtains a shared session-level advisory lock, waiting if necessary.
pg_advisory_unlock ( key bigint ) → boolean
pg_advisory_unlock ( key1 integer, key2 integer ) → boolean
Releases a previously-acquired exclusive session-level advisory lock. Returns true if the lock is successfully released. If the lock was not held, false is returned, and in addition, an SQL warning will be reported by the server.
pg_advisory_unlock_all () → void
Releases all session-level advisory locks held by the current session. (This function is implicitly invoked at session end, even if the client disconnects ungracefully.)
pg_advisory_unlock_shared ( key bigint ) → boolean
pg_advisory_unlock_shared ( key1 integer, key2 integer ) → boolean
Releases a previously-acquired shared session-level advisory lock. Returns true if the lock is successfully released. If the lock was not held, false is returned, and in addition, an SQL warning will be reported by the server.
pg_advisory_xact_lock ( key bigint ) → void
pg_advisory_xact_lock ( key1 integer, key2 integer ) → void
Obtains an exclusive transaction-level advisory lock, waiting if necessary.
pg_advisory_xact_lock_shared ( key bigint ) → void
pg_advisory_xact_lock_shared ( key1 integer, key2 integer ) → void
Obtains a shared transaction-level advisory lock, waiting if necessary.
pg_try_advisory_lock ( key bigint ) → boolean
pg_try_advisory_lock ( key1 integer, key2 integer ) → boolean
Obtains an exclusive session-level advisory lock if available. This will either obtain the lock immediately and return true, or return false without waiting if the lock cannot be acquired immediately.
pg_try_advisory_lock_shared ( key bigint ) → boolean
pg_try_advisory_lock_shared ( key1 integer, key2 integer ) → boolean
Obtains a shared session-level advisory lock if available. This will either obtain the lock immediately and return true, or return false without waiting if the lock cannot be acquired immediately.
pg_try_advisory_xact_lock ( key bigint ) → boolean
pg_try_advisory_xact_lock ( key1 integer, key2 integer ) → boolean
Obtains an exclusive transaction-level advisory lock if available. This will either obtain the lock immediately and return true, or return false without waiting if the lock cannot be acquired immediately.
pg_try_advisory_xact_lock_shared ( key bigint ) → boolean
pg_try_advisory_xact_lock_shared ( key1 integer, key2 integer ) → boolean
Obtains a shared transaction-level advisory lock if available. This will either obtain the lock immediately and return true, or return false without waiting if the lock cannot be acquired immediately.
Creates a named marker record in the write-ahead log that can later be used as a recovery target, and returns the corresponding write-ahead log location. The given name can then be used with to specify the point up to which recovery will proceed. Avoid creating multiple restore points with the same name, since recovery will stop at the first one whose name matches the recovery target.
Calculates the difference in bytes between two write-ahead log locations. This can be used with pg_stat_replication or some of the functions shown in to get the replication lag.
A transaction can export more than one snapshot, if needed. Note that doing so is only useful in READ COMMITTED transactions, since in REPEATABLE READ and higher isolation levels, transactions use the same snapshot throughout their lifetime. Once a transaction has exported any snapshots, it cannot be prepared with .
Creates a new physical replication slot named slot_name. The optional second parameter, when true, specifies that the LSN for this replication slot be reserved immediately; otherwise the LSN is reserved on first connection from a streaming replication client. Streaming changes from a physical slot is only possible with the streaming-replication protocol — see . The optional third parameter, temporary, when set to true, specifies that the slot should not be permanently stored to disk and is only meant for use by the current session. Temporary slots are also released upon any error. This function corresponds to the replication protocol command CREATE_REPLICATION_SLOT ... PHYSICAL.
fsm returns the size of the Free Space Map (see ) associated with the relation.
vm returns the size of the Visibility Map (see ) associated with the relation.
Returns the “filenode” number currently assigned to the specified relation. The filenode is the base component of the file name(s) used for the relation (see for more information). For most relations the result is the same as pg_class.relfilenode, but for certain system catalogs relfilenode is zero and this function must be used to get the correct value. The function returns NULL if passed a relation that does not have storage, such as a view.
Returns the actual version of the collation object as it is currently installed in the operating system. If this is different from the value in pg_collation.collversion, then objects depending on the collation might need to be rebuilt. See also .
Adds collations to the system catalog pg_collation based on all the locales it finds in the operating system. This is what initdb uses; see for more details. If additional locales are installed into the operating system later on, this function can be run again to add collations for the new locales. Locales that match existing entries in pg_collation will be skipped. (But collation objects based on locales that are no longer present in the operating system are not removed by this function.) The schema parameter would typically be pg_catalog, but that is not a requirement; the collations could be installed into some other schema as well. The function returns the number of new collation objects it created.
Cleans up the “pending” list of the specified GIN index by moving entries in it, in bulk, to the main GIN data structure. Returns the number of pages removed from the pending list. If the argument is a GIN index built with the fastupdate option disabled, no cleanup happens and the result is zero, because the index doesn't have a pending list. See and for details about the pending list and fastupdate option.