8.5. 日期時間型別
Last updated
Was this helpful?
Last updated
Was this helpful?
PostgreSQL 支援完整的 SQL 日期和時間格式，如表 8.9 所示。對於這些資料型態能使用的操作，將會在說明。
Table 8.9. 日期/時間型態
Name
Storage Size
Description
Low Value
High Value
Resolution
timestamp [ (p) ] [ without time zone ]
8 bytes
both date and time (no time zone)
4713 BC
294276 AD
1 microsecond
timestamp [ (p) ] with time zone
8 bytes
both date and time, with time zone
4713 BC
294276 AD
1 microsecond
date
4 bytes
date (no time of day)
4713 BC
5874897 AD
1 day
time [ (p) ] [ without time zone ]
8 bytes
time of day (no date)
00:00:00
24:00:00
1 microsecond
time [ (p) ] with time zone
12 bytes
time of day (no date), with time zone
00:00:00+1459
24:00:00-1459
1 microsecond
interval [ fields ] [ (p) ]
16 bytes
time interval
-178000000 years
178000000 years
1 microsecond
SQL 標準中要求 timestamp 的效果等同於 timestamp without time zone，對此 PostgreSQL 尊重這個行為。同時 PostgreSQL 額外擴充了 timestamptz 作為 timestamp with time zone 的縮寫。
time、timestamp 和 interval 接受 p 作為非必須的精度參數，可指定秒的欄位保留的小數位數。預設情況下，精度沒有明確的界限。其中 p 允許的範圍是 0 到 6。
interval 型態有個額外的選項，可以寫下下列其中一個詞組來限制存放的欄位：
需注意若是 fields 和 p 同時指定時，fields 必須要包含 SECOND。這是因為精度只會套用在秒上。
time with time zone 型態是由 SQL 標準所定義的，但是在定義中展示的屬性會導致對有用性產生疑問。在多數狀況下，date、time、timestamp without time zone 和 timestamp with time zone 的組合應該就能提供任何應用程式需要的完整日期/時間功能。
abstime 和 reltime 型態是較低精度的內部用型態，並不建議將這些型態用在應用程式中；這些內部型態也可能在未來的釋出中消失。
其中 p 是非必須的精度設定，用來指定秒欄位的小數位數。精度可以用來指定 time、timestamp 和 interval 型態，可指定範圍為 0 到 6。如果沒有指定精度時，預設將以字面數值的精度為準（但最多不超過 6 位）。
表 8.10. 日期輸入
Example
Description
1999-01-08
ISO 8601; January 8 in any mode (recommended format)
January 8, 1999
unambiguous in any datestyle input mode
1/8/1999
January 8 in MDY mode; August 1 in DMY mode
1/18/1999
January 18 in MDY mode; rejected in other modes
01/02/03
January 2, 2003 in MDY mode; February 1, 2003 in DMY mode; February 3, 2001 in YMD mode
1999-Jan-08
January 8 in any mode
Jan-08-1999
January 8 in any mode
08-Jan-1999
January 8 in any mode
99-Jan-08
January 8 in YMD mode, else error
08-Jan-99
January 8, except error in YMD mode
Jan-08-99
January 8, except error in YMD mode
19990108
ISO 8601; January 8, 1999 in any mode
990108
ISO 8601; January 8, 1999 in any mode
1999.008
year and day of year
J2451187
Julian date
January 8, 99 BC
year 99 BC
time-of-day 格式包含 time [ (p) ] without time zone和time [ (_p_\) \] with time zone，其中 time 單獨出現時等同於 time without time zone。
表 8.11. 時間輸入
Example
Description
04:05:06.789
ISO 8601
04:05:06
ISO 8601
04:05
ISO 8601
040506
ISO 8601
04:05 AM
same as 04:05; AM does not affect value
04:05 PM
same as 16:05; input hour must be <= 12
04:05:06.789-8
ISO 8601
04:05:06-08:00
ISO 8601
04:05-08:00
ISO 8601
040506-08
ISO 8601
04:05:06 PST
time zone specified by abbreviation
2003-04-12 04:05:06 America/New_York
time zone specified by full name
表 8.12. 時區輸入
Example
Description
PST
Abbreviation (for Pacific Standard Time)
America/New_York
Full time zone name
PST8PDT
POSIX-style time zone specification
-8:00
ISO-8601 offset for PST
-800
ISO-8601 offset for PST
-8
ISO-8601 offset for PST
zulu
Military abbreviation for UTC
z
Short form of zulu
時間戳記型態的合法輸入，依序包含了日期、時間、非必須的時區、以及非必須的 AD 或者 BC。 （其中，AD 或者 BC 也可以寫在時區前面，但這並非推薦的格式。）因此：
以及：
都是遵循 ISO 8601 標準的合法值。除此之外，常見的格式：
也有支援。
SQL 標準中，timestamp without time zone 和 timestamp with time zone 字面可以在時間後面加上 “+” 或 “-” 符號和時差來做區別，因此根據這個標準，
是 timestamp without time zone 型態，而
則是 timestamp with time zone 型態。PostgreSQL 從不會在識別型態前就解析字面的內容，因此會將上述兩種值都視為 timestamp without time zone 型態。如要確保字面會被視為 timestamp with time zone，請給它正確而明確的型態：
在一個已被確定為沒有時區的時間戳記的字串中，PostgreSQL 將默默地忽略任何時區指示。也就是說，結果值是從輸入值中的日期/時間字串產生的，而不針對時區進行調整。
沒有時區的時間戳記和帶時區的時間戳記之間的轉換通常假定應該採用沒有時區值的時間戳記或本地時間所給予的時區。可以使用 AT TIME ZONE 為指定轉換不同的時區。
為方便起見，PostgreSQL 支援幾個特殊的日期/時間輸入值，如 Table 8.13 所示。infinaity 和 -infinity 值在系統內部有特別的表示，但不會顯示；而其他的只是符號縮寫，在閱讀時會轉換為普通的日期/時間值。（特別是，now 和相關的字串一旦被讀取就會被轉換為特定的時間值。）當在 SQL 命令中要作為常數使用時，所有這些值都需要用單引號括起來。
Table 8.13. Special Date/Time Inputs
Input String
Valid Types
Description
epoch
date, timestamp
1970-01-01 00:00:00+00 (Unix system time zero)
infinity
date, timestamp
later than all other time stamps
-infinity
date, timestamp
earlier than all other time stamps
now
date, time, timestamp
current transaction's start time
today
date, timestamp
midnight today
tomorrow
date, timestamp
midnight tomorrow
yesterday
date, timestamp
midnight yesterday
allballs
time
00:00:00.00 UTC
Table 8.14. Date/Time Output Styles
Style Specification
Description
Example
ISO
ISO 8601, SQL standard
1997-12-17 07:37:16-08
SQL
traditional style
12/17/1997 07:37:16.00 PST
Postgres
original style
Wed Dec 17 07:37:16 1997 PST
German
regional style
17.12.1997 07:37:16.00 PST
ISO 8601 specifies the use of uppercase letter T to separate the date and time. PostgreSQLaccepts that format on input, but on output it uses a space rather than T, as shown above. This is for readability and for consistency with RFC 3339 as well as some other database systems.
Table 8.15. Date Order Conventions
datestyle Setting
Input Ordering
Example Output
SQL, DMY
day/month/year
17/12/1997 15:37:16.00 CET
SQL, MDY
month/day/year
12/17/1997 07:37:16.00 PST
Postgres, DMY
day/month/year
Wed 17 Dec 07:37:16 1997 PST
Time zones, and time-zone conventions, are influenced by political decisions, not just earth geometry. Time zones around the world became somewhat standardized during the 1900s, but continue to be prone to arbitrary changes, particularly with respect to daylight-savings rules. PostgreSQL uses the widely-used IANA (Olson) time zone database for information about historical time zone rules. For times in the future, the assumption is that the latest known rules for a given time zone will continue to be observed indefinitely far into the future.
PostgreSQL endeavors to be compatible with the SQL standard definitions for typical usage. However, the SQL standard has an odd mix of date and time types and capabilities. Two obvious problems are:
Although the date type cannot have an associated time zone, the time type can. Time zones in the real world have little meaning unless associated with a date as well as a time, since the offset can vary through the year with daylight-saving time boundaries.
The default time zone is specified as a constant numeric offset from UTC. It is therefore impossible to adapt to daylight-saving time when doing date/time arithmetic across DST boundaries.
To address these difficulties, we recommend using date/time types that contain both date and time when using time zones. We do not recommend using the type time with time zone (though it is supported by PostgreSQL for legacy applications and for compliance with the SQL standard). PostgreSQL assumes your local time zone for any type containing only date or time.
PostgreSQL allows you to specify time zones in three different forms:
In addition to the timezone names and abbreviations, PostgreSQL will accept POSIX-style time zone specifications of the form STDoffset or STDoffsetDST, where STD is a zone abbreviation, offset is a numeric offset in hours west from UTC, and DST is an optional daylight-savings zone abbreviation, assumed to stand for one hour ahead of the given offset. For example, if EST5EDT were not already a recognized zone name, it would be accepted and would be functionally equivalent to United States East Coast time. In this syntax, a zone abbreviation can be a string of letters, or an arbitrary string surrounded by angle brackets (<>). When a daylight-savings zone abbreviation is present, it is assumed to be used according to the same daylight-savings transition rules used in the IANA time zone database's posixrules entry. In a standard PostgreSQL installation, posixrules is the same as US/Eastern, so that POSIX-style time zone specifications follow USA daylight-savings rules. If needed, you can adjust this behavior by replacing the posixrules file.
In short, this is the difference between abbreviations and full names: abbreviations represent a specific offset from UTC, whereas many of the full names imply a local daylight-savings time rule, and so have two possible UTC offsets. As an example, 2014-06-04 12:00 America/New_York represents noon local time in New York, which for this particular date was Eastern Daylight Time (UTC-4). So 2014-06-04 12:00 EDT specifies that same time instant. But 2014-06-04 12:00 EST specifies noon Eastern Standard Time (UTC-5), regardless of whether daylight savings was nominally in effect on that date.
To complicate matters, some jurisdictions have used the same timezone abbreviation to mean different UTC offsets at different times; for example, in Moscow MSK has meant UTC+3 in some years and UTC+4 in others. PostgreSQLinterprets such abbreviations according to whatever they meant (or had most recently meant) on the specified date; but, as with the EST example above, this is not necessarily the same as local civil time on that date.
One should be wary that the POSIX-style time zone feature can lead to silently accepting bogus input, since there is no check on the reasonableness of the zone abbreviations. For example, SET TIMEZONE TO FOOBAR0 will work, leaving the system effectively using a rather peculiar abbreviation for UTC. Another issue to keep in mind is that in POSIX time zone names, positive offsets are used for locations west of Greenwich. Everywhere else, PostgreSQLfollows the ISO-8601 convention that positive timezone offsets are east of Greenwich.
In all cases, timezone names and abbreviations are recognized case-insensitively. (This is a change from PostgreSQL versions prior to 8.2, which were case-sensitive in some contexts but not others.)
The SQL command SET TIME ZONE sets the time zone for the session. This is an alternative spelling of SET TIMEZONE TO with a more SQL-spec-compatible syntax.
The PGTZ environment variable is used by libpq clients to send a SET TIME ZONE command to the server upon connection.
interval values can be written using the following verbose syntax:
Quantities of days, hours, minutes, and seconds can be specified without explicit unit markings. For example, '1 12:59:10' is read the same as '1 day 12 hours 59 min 10 sec'. Also, a combination of years and months can be specified with a dash; for example '200-10' is read the same as '200 years 10 months'. (These shorter forms are in fact the only ones allowed by the SQL standard, and are used for output when IntervalStyle is set to sql_standard.)
Interval values can also be written as ISO 8601 time intervals, using either the “format with designators” of the standard's section 4.4.3.2 or the “alternative format” of section 4.4.3.3. The format with designators looks like this:
Table 8.16. ISO 8601 Interval Unit Abbreviations
Abbreviation
Meaning
Y
Years
M
Months (in the date part)
W
Weeks
D
Days
H
Hours
M
Minutes (in the time part)
S
Seconds
In the alternative format:
the string must begin with P, and a T separates the date and time parts of the interval. The values are given as numbers similar to ISO 8601 dates.
When writing an interval constant with a fields specification, or when assigning a string to an interval column that was defined with a fields specification, the interpretation of unmarked quantities depends on the fields. For example INTERVAL '1' YEAR is read as 1 year, whereas INTERVAL '1' means 1 second. Also, field values “to the right” of the least significant field allowed by the fields specification are silently discarded. For example, writing INTERVAL '1 day 2:03:04' HOUR TO MINUTE results in dropping the seconds field, but not the day field.
According to the SQL standard all fields of an interval value must have the same sign, so a leading negative sign applies to all fields; for example the negative sign in the interval literal '-1 2:03:04' applies to both the days and hour/minute/second parts. PostgreSQL allows the fields to have different signs, and traditionally treats each field in the textual representation as independently signed, so that the hour/minute/second part is considered positive in this example. If IntervalStyle is set to sql_standard then a leading sign is considered to apply to all fields (but only if no additional signs appear). Otherwise the traditional PostgreSQL interpretation is used. To avoid ambiguity, it's recommended to attach an explicit sign to each field if any field is negative.
Internally interval values are stored as months, days, and seconds. This is done because the number of days in a month varies, and a day can have 23 or 25 hours if a daylight savings time adjustment is involved. The months and days fields are integers while the seconds field can store fractions. Because intervals are usually created from constant strings or timestamp subtraction, this storage method works well in most cases. Functions justify_days and justify_hours are available for adjusting days and hours that overflow their normal ranges.
In the verbose input format, and in some fields of the more compact input formats, field values can have fractional parts; for example '1.5 week' or '01:02:03.45'. Such input is converted to the appropriate number of months, days, and seconds for storage. When this would result in a fractional number of months or days, the fraction is added to the lower-order fields using the conversion factors 1 month = 30 days and 1 day = 24 hours. For example,'1.5 month' becomes 1 month and 15 days. Only seconds will ever be shown as fractional on output.
Table 8.17. Interval Input
Example
Description
1-2
SQL standard format: 1 year 2 months
3 4:05:06
SQL standard format: 3 days 4 hours 5 minutes 6 seconds
1 year 2 months 3 days 4 hours 5 minutes 6 seconds
Traditional Postgres format: 1 year 2 months 3 days 4 hours 5 minutes 6 seconds
P1Y2M3DT4H5M6S
ISO 8601 “format with designators”: same meaning as above
P0001-02-03T04:05:06
ISO 8601 “alternative format”: same meaning as above
The sql_standard style produces output that conforms to the SQL standard's specification for interval literal strings, if the interval value meets the standard's restrictions (either year-month only or day-time only, with no mixing of positive and negative components). Otherwise the output looks like a standard year-month literal string followed by a day-time literal string, with explicit signs added to disambiguate mixed-sign intervals.
The output of the postgres_verbose style matches the output of PostgreSQL releases prior to 8.4 when the DateStyle parameter was set to non-ISO output.
The output of the iso_8601 style matches the “format with designators” described in section 4.4.3.2 of the ISO 8601 standard.
Table 8.18. Interval Output Style Examples
Style Specification
Year-Month Interval
Day-Time Interval
Mixed Interval
sql_standard
1-2
3 4:05:06
-1-2 +3 -4:05:06
postgres
1 year 2 mons
3 days 04:05:06
-1 year -2 mons +3 days -04:05:06
postgres_verbose
@ 1 year 2 mons
@ 3 days 4 hours 5 mins 6 secs
@ 1 year 2 mons -3 days 4 hours 5 mins 6 secs ago
iso_8601
P1Y2M
P3DT4H5M6S
P-1Y-2M3DT-4H-5M-6S
日期和時間的輸入格式可以接受幾乎任何合理的格式，包括 ISO 8601、相容於 SQL 的格式、傳統 POSTGRES 格式或者其他格式。在部份格式中，日期的年、月、日的順序可能很含糊，因此有支援指定這些欄位期望的順序。可以設定 參數為 MDY 來以 月-日-年 表示、設定為 DMY 以 日-月-年 表示、或者設定為 YMD 以 年-月-日 表示。
PostgreSQL 在處理日期/時間的輸入是比 SQL 標準要求的更加靈活，關於精確的解析規則以及包含月份、一週天數、時區等可以接受的文字欄位，可以參閱。
請記得，任何日期和時間字面的輸入，都需要像文字一樣以單引號結束，詳細的資訊請參閱。SQL 要求使用以下的語法：
列出 date 型態的一些可能的輸入格式：
這些型態的合法輸入包含了一天當中的時間，以及非必須的時區。（請參照 和）。如果在 time without time zone 的輸入中指定了時區，則時區會被無聲地忽略。你也可以指定日期，但日期也會被忽略，除非你指定的時區名稱是像 America/New_York 這種具有日光節約規則的時區，因為在這種狀況下，為了能夠決定要套用一般規則或是日光節約規則，必須要有日期。適合的時差資訊會被紀錄在 time with time zone 的值當中。
關於指定時區的其他資訊，請參照。
對於帶有時區的時間戳記，內部儲存的值始終為 UTC（Universal Coordinated Time，傳統上稱為格林威治標準時間，GMT）。具有指定時區的輸入值將使用該時區的相對偏移量轉換為 UTC。如果輸入字串中未指定時區，則假定它位於系統的 參數所指示的時區中，並使用時區的偏移量轉換為 UTC。
輸出帶有時區值的時間戳記時，始終由 UTC 轉換為目前時區，並在該時區中顯示為本地時間。要查看另一個時區的時間，請變更時區或使用 AT TIME ZONE 語法（參閱）。
以下 SQL 相容函數也可用於取得相對應資料型別目前的時間值：CURRENT_DATE，CURRENT_TIME，CURRENT_TIMESTAMP，LOCALTIME，LOCALTIMESTAMP。後四者接受選擇性的 subsecond 級精確度。 （請參閱。）請注意，這些是 SQL 函數，在資料輸入字串中會無法識別。
The output format of the date/time types can be set to one of the four styles ISO 8601, SQL (Ingres), traditional POSTGRES (Unix date format), or German. The default is the ISO format. (The SQL standard requires the use of the ISO 8601 format. The name of the “SQL” output format is a historical accident.) shows examples of each output style. The output of the date and time types is generally only the date or time part in accordance with the given examples. However, the POSTGRES style outputs date-only values in ISO format.
In the SQL and POSTGRES styles, day appears before month if DMY field ordering has been specified, otherwise month appears before day. (See for how this setting also affects interpretation of input values.) shows examples.
The date/time style can be selected by the user using the SET datestyle command, the parameter in the postgresql.conf configuration file, or the PGDATESTYLE environment variable on the server or client.
The formatting function to_char (see ) is also available as a more flexible way to format date/time output.
All timezone-aware dates and times are stored internally in UTC. They are converted to local time in the zone specified by the configuration parameter before being displayed to the client.
A full time zone name, for example America/New_York. The recognized time zone names are listed in the pg_timezone_names view (see ). PostgreSQL uses the widely-used IANA time zone data for this purpose, so the same time zone names are also recognized by much other software.
A time zone abbreviation, for example PST. Such a specification merely defines a particular offset from UTC, in contrast to full time zone names which can imply a set of daylight savings transition-date rules as well. The recognized abbreviations are listed in the pg_timezone_abbrevs view (see ). You cannot set the configuration parameters or to a time zone abbreviation, but you can use abbreviations in date/time input values and with the AT TIME ZONE operator.
Neither timezone names nor abbreviations are hard-wired into the server; they are obtained from configuration files stored under .../share/timezone/ and .../share/timezonesets/ of the installation directory (see ).
The configuration parameter can be set in the file postgresql.conf, or in any of the other standard ways described in . There are also some special ways to set it:
where quantity is a number (possibly signed); unit is microsecond, millisecond, second, minute, hour, day, week, month, year, decade, century, millennium, or abbreviations or plurals of these units; direction can be ago or empty. The at sign (@) is optional noise. The amounts of the different units are implicitly added with appropriate sign accounting. ago negates all the fields. This syntax is also used for interval output, if is set to postgres_verbose.
The string must start with a P, and may include a T that introduces the time-of-day units. The available unit abbreviations are given in . Units may be omitted, and may be specified in any order, but units smaller than a day must appear after T. In particular, the meaning of M depends on whether it is before or after T.
shows some examples of valid interval input.
The output format of the interval type can be set to one of the four styles sql_standard, postgres, postgres_verbose, or iso_8601, using the command SET intervalstyle. The default is the postgres format. shows examples of each output style.
The output of the postgres style matches the output of PostgreSQL releases prior to 8.4 when the parameter was set to ISO.